Single phase transformers - med (ELEKTROKOV, a. s. ZNOJMO)

SINGLE PHASE TRANSFORMERS - MED

MED-S

Single-phase transformers MED for medical systems with UI alternately stacked lamination are produced with electrical output power and dimensions according to table below. Covering IP 00. They comply with the required conditions for medical equipment according to ČSN EN 61558-2-15.

- reinforced insulation and shielding between primary and secondary winding.
- magnetizing current < 3%, short-circuit voltage < 3%.
- inrush current maximally 12x nominal current (peak/peak).
- transformer is equipped by thermal switch 2A, 15A if required.

Type:
MED-S – centre tapped secondary winding.

MED-S

Type	Style	Dimensions [mm]							Power	Core c. s. area	Core size	Weight (informative)
		A	B	C	C'	D	E	F	kVA	cm²	mm	kg
U 5052	MED-S	200	122	255		124	92	9	1	25,48	150 x 250	21,5
U 5065	MED-S	200	135	255		124	105	9	1,6	31,85	150 x 250	27,5
U 5077	MED-S	200	147	255		124	117	9	2	37,73	150 x 250	32,5
U 50103	MED-S	200	173	255		124	143	9	2,5	50,47	150 x 250	42,5
U 50103	MED-S	200	173	255		124	173	9	3,15	50,47	150 x 250	42,5
U 7053	MED-S	280	153	385		176	130	13	4	36,36	210 x 350	52,5
U 7053	MED-S	280	153	385		176	130	13	5	36,36	210 x 350	52,5
U 7053	MED-S	280	175	385		176	150	13	6,3	49,94	210 x 350	71,5
U 70103	MED-S	280	205	385		176	180	13	8	70,59	210 x 350	89,5
U 70133	MED-S	280	235	385		176	210	13	10	91,24	210 x 350	113,5

Further products from section Single phase transformers UI:

horizontally mounted	300	-	1200	VA
vertically mounted	300	-	1250	VA
vertically mounted	1500	-	16000	VA
vertically mounted - MED	1500	-	8000	VA

Back to products list
Transformer information and marking

All of our products you can order by using order form or you can contact our sales department.